Step 1. Start Main Program and register your product online.

How to register my product online?

Step 2. Select a Network Adapter to capture network packets.

What we called “Bind Network Adapter” is to appoint a network adapter from which the communication package will be captured.
The user should choose network adapter carefully if more than one network adapters installed in a computer in which the product is installed. If the network adapter is chosen incorrectly, iNetWatcher will not be able to monitor any information, nor able to control any target computer.

The user should choose an network adapter which is in the Intranet network segment,  instead of  the one connected  to the Internet. In case that more than one network adapters exist in an Intranet network segment, the user may be required to test them one by one to check their monitoring effect via window’s On-Spot View.

Step 3. Select a Monitoring Mode ( Based on MAC / IP / Account ).

Various monitoring modes such as “Based on Network adapter” , “Based on Account” and  “Based on IP Address”  are simultaneously equipped by iNetWatcher 5. We recommend to select “Based on Network adapter MAC” mode when the PCs to be monitored are less than 500.

Note: Do not change 'advanced' setting unless filtering  internet activities don't take effect.  >>more details

Step 4. Start Monitoring Service.

Note: Double click mouse on the icons to start or stop services.

Step 5. Set the Network Configuration.

How to set the network configuration?

Step 6. Search all Computers  in the local area network.

    indicates that the computer is being monitored;
    indicates that the computer is not being monitored;
    indicates that computer is neither being monitored, nor being permitted to connect to the Internet. 

    Note: Double click mouse on the items to edit computer's name.

Step 7. View On-Spot the Online Status and Confirm the Result of Monitoring.